Home
Topics
トピックス
Labo
研究室
Member
メンバー
Research
研究内容紹介
Articles
研究成果
Lecture
講義
Access/Link
アクセス＆リンクSpecial
高校生のための
「機械工学体験セミナー」

研究成果
１）論文（2008~）　全リストはこちら
  1. 坂井田喜久，清水俊之，日本刀茎やすり目のX線による残留応力場評価，材料，第66巻，第7号，pp. 495-501(2017).
  2. S. Yashiro, J. Wada and Y. Sakaida, A monitoring technique for disbond area in CFRP bonded joints using embedded fiber Bragg grating sensors: development and experimental validation, Structural Health Monitering, 16-2, pp. 185-201 (2017).
  3. S. Yashiro, Y. Sakaida, Y. Shimamura and Y. Inoue, Evaluation of interfacial shear stress between multi-walled carbon nanotubes and epoxy based on strain distribution measurement using Raman spectroscopy,Composites Part A: Applied Science and Manufacturing, 85, pp. 192-198(2016).
  4. 坂井田喜久, 栗村隆之，2次元検出器を用いた応力測定法の現状と今後の展開－２次元検出器を用いた応力測定法の課題と展望－，材料，第64巻，第9号，pp.745-750 (2015).
  5. 坂井田喜久，2次元検出器を用いた応力測定法の現状と今後の展開－２次元検出器を用いた応力測定法の現状－，材料，第64巻，第7号，pp. 745-750 (2015).
  6. Y. Sakaida, T. Inayama and S. Yashiro, Estimation of Cross-Sectional Residual Stress Distribution on Hardened Layer of Carburized Chromium-Molybdenum Steel by Electron Backscattering Diffraction Method, Advanced Materials Research, Vol. 996, pp. 556-561 (2014).
  7. 坂井田喜久，稲山朝仁，矢代茂樹,電子線後方散乱回折法による浸炭焼入鋼の硬化層深さと残留応力の評価，材料，第63巻，第7号，pp.557-562 (2014).
  8. Y. Sakaida, H. Yoshida, S. Yashiro, S. Yamashita and T. Shobu, Internal Residual Strain Distribution in Chromium–Molybdenum Steel after Carburizing and Quenching Measured by Neutron Strain Scanning, Materials Science Forum Vol. 772, pp 173-177, (2014).
  9. Y. Sakaida, H. Yoshida, S. Yashiro and T. Murai, Influence of Final Hand Polishing Process on Surface Residual Stress Field of Japanese Sword, Materials Science Forum Vol. 768-769, pp 492-499, (2014).
  10. S. Yashiro, K. Ogi, A. Yoshimura and Y. Sakaida, Characterization of high-velocity impact damage in CFRP laminates: Part II- prediction by smoothed particle hydrodynamics, Composites Part A, Applied Science and Manufacturing, vol. 56A, pp. 308-318 (2014).
  11. 坂井田喜久，村井俊之，吉田始, 日本刀表層の残留応力分布と断面微構造の関係，材料，第62巻，第7号，pp.430-436 (2013).
  12. 坂井田喜久, 矢代茂樹, 吉田始, クロムモリブデン鋼の浸炭硬化層の機械的およびX線的弾性定数に及ぼす炭素濃度の影響, 材料，第62巻, 第5号, pp. 335-341 (2013)
  13. 吉田始，坂井田喜久, 中村保, 早川邦夫, 磯谷章，矢代茂樹，外径絞りあるいは内径拡張を伴う冷間押出しによるスプライン穴を持つ平歯車の成形，塑性と加工, Vol. 54, No. 626, p. 262-266 (2013)
  14. 吉田始，沢木洋三, 坂井田喜久, 中村保, 早川邦夫, 鈴木正, 二段充てん法による内はすば歯車の成形,塑性と加工, Vol. 54, No. 624, p. 64-68 (2013)
  15. 吉田始, 坂井田喜久, 沢木洋三, 中村保, 早川邦夫, 磯谷章, スプライン穴付き歯車の押出し成形,塑性と加工, Vol. 54, No. 624, p. 69-73 (2013)
  16. 吉田 始 , 沢木 洋三 , 坂井田 喜久 , 中村 保 , 早川 邦夫 , 矢代 茂樹，異種層状円筒試料の押出しによる歯車の成形，塑性と加工 53-621, pp. 929-933 (2012).
  17. S. Yashiro, H. Sasaki and Y. Sakaida, Particle simulation for predicting fiber motion in injection molding of short-fiber-reinforced composites,Composites,  Vol. 43A, pp. 1754–1764, (2012).
  18. 吉田始, 坂井田喜久, 沢木洋三, 中村保，早川邦夫，磯谷章, 内径拡張を伴う外歯車の押出し成形，塑性と加工，第53巻，第613号，pp. 140-144 (2012).
  19. 坂井田喜久, 芹澤崇宣, 卍山下道哉, 中性子ひずみスキャニングによる浸炭焼入したクロムモリブデン鋼内部の残留ひずみ測定, 材料，第60巻, 第7号, pp. 630-635 (2011).
  20. 坂井田喜久，川内基範，菖蒲敬久，クロムモリブデン鋼の浸炭焼入後の硬化層の回折面間隔変化, 材料，第60巻, 第7号, pp. 649-654 (2011).
  21. Y. Sakaida, S. Yamashita and M. Manzanka, Residual Stress Distribution in Hardened Case Layer of Cr-Mo Steel after Carburizing and Quenching, Materials Science Forum Vol. 681, pp 346-351, (2011).
  22. Y. Sakaida, H. Yoshida and S. Mori, Influences of Crack Face Bridging Stress and Microstructure on Fracture Toughness of Toughened Alumina Ceramics, Key Engineering Materials, Vols. 462-463, pp 972-978, (2011).
  23. 吉田始, 沢木洋三, 坂井田喜久, 松岡雄，浸炭試料を用いた平歯車の押出し成形，塑性と加工，第51巻，第598号，pp. 1078-1082 (2010).
  24. 吉田始, 沢木洋三, 坂井田喜久，内径拡張押出しによる平歯車の成形，塑性と加工，第51巻，第598号，pp. 1083-1087 (2010).
  25. 吉田始，坂井田喜久，沢木洋三，低断面減少率下での二段充てん法による平歯車の成形，塑性と加工，第51巻，第597号，pp. 979-983 (2010).
  26. Y. Sakaida, T. Serizawa, M. Kawauchi and M. Manzanka, Residual Stress Evaluation of Carburized Transmission Steel Gear Using Neutron and Synchrotron X-ray Diffraction and Finite Element Methods, Materials Science Forum Vol. 652, pp 31-36 (2010).
  27. Y. Sakaida, M. Kawauchi and M. Manzanka, Residual Stress Distribution Under Hardening Layer of Carburized Transmission Gear by Neutron Diffraction, Advances in X-ray Analysis, Vol.52, pp. 561-568(2009).
  28. H. Yoshida, Y. Sawaki and Y. Sakaida, Shaping of Helical Gear by Two-Step Cold Extrusion, Materials Transactions, Vol.49, No.5, pp. 1162-1167 (2008).
  29. 坂井田喜久，川内基範，卍山下道哉，秋吉裕和，鈴木裕士，齊藤徹, 中性子回折による浸炭歯車の内部ひずみ測定, 日本機械学会論文集(A編), 74巻, 740号, pp.598-604(2008).
  30. 坂井田喜久, X線回折線幅の多点測定による高周波焼入鋼の硬化層深さの非破壊評価, 日本機械学会論文集(A編), 74巻, 738号, pp. 281-287 (2008).
  31. Y. Sakaida and S. Mori, Two-Dimensional Mapping of Crack-Face Bridging Stresses in Alumina Using Synchrotron Micro X-Ray Beam, Materials Science Forum, Vol.571-572, pp.243-248 (2008).
２）国際会議（2008~）　全リストはこちら
  1. Y. Sakaida, T. Inayama and S. Yashiro, Indirect Estimation of Cross-Sectional Residual Stress Distribution on Hardened Layer of Carburized Chromium-Molybdenum Steel by Electron Backscattering Diffraction Method, 9th European Conference on Residual Stresses (ECRS-9), p. 26 (2014), Troyes, France.
  2. R. Ono, S. Yashiro, K. Ogi, Y. Sakaida, Damage evolution in CFRP laminates by shear cutting: experiment and numrical analysis, 13th Japan International SAMPE Symposium & Exhibition (JISSE13), ID1604 (2013), Nagoya, Japan.
  3. S. Yashiro, K. Ishii, Y. Sakaida, Multiphase compression molding simulation for long-fiber-reinforced plastics by a particle method, 13th Japan International SAMPE Symposium & Exhibition (JISSE13), ID1702 (2013), Nagoya, Japan.
  4. S. Yashiro, Y. Sakaida, Experimental observation of micro/macro-void formation in imitated resin transfer molding, The 9th Japan-Korea Joint Symposium on Composite Materials, pp. 259-260 (2013), Kagoshima, Japan.
  5. Y. Sakaida, H. Yoshida, S. Yashiro and T. Murai, Residual Stresses and Microstructure of Japanese Sword, The 9th International Conference on Residual Stresses (ICRS-9), p. 87 (2012), Garmisch-Partenkirchen, Germany.
  6. Y. Sakaida, S. Yamashita, H. Yoshida, S. Yashiro and T. Shobu, Residual Strain Distribution in Chrome Molybdenum Ateel after Carburizing and Quenching by Neutron Strain Scanning, The 6th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (MECA SENS VI), p.14 (2011), Hamburg, Germany.
  7. Y. Sakaida, S. Yamashita and M. Manzanka, Residual Stress Distribution of Carburized Steel after Quenching Evaluated by X-ray Diffraction and Finite Element Methods, The 8th European Conference on Residual Stresses (ECRS8), p.33 (2010), Riva del Garda, Italy.
  8. Y. Sakaida, H. Yoshida and S. Mori, Influences of Crack Face Bridging Stress and Microstructure on Fracture Toughness of Toughened Alumina Ceramics, The 8th International Conference on Fracture & Strength of Solids, p.18 (2010), Kuala Lumpur, Malaysia.
  9. Y. Sakaida T. Serizawa, M. Kawauchi and M. Manzanka, Residual Stress Evaluation of Carburized Steel Using Neutron Diffraction and Finite element Methods, The 5th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (MECA SENS V), p.40 (2009), Mito, Japan
  10. Y. Sakaida, M. Kawauchi and M. Manzanka, Residual Stress Distribution below Subsurface Carburized layer in Carbon Steel Gear by Neutron Diffraction, The 8th International Conference on Residual Stresses, p.167-168 (2008), Denver, USA.
３）著書，書評（2008~）　全リストはこちら
  1. 共著：機械屋のための分析装置ガイドブック，日本塑性加工学会編，コロナ社（2012），33.Ｘ線透過試験装置，34.Ｘ線回折装置，pp.181-195.
  2. 書評，放射光による応力とひずみの評価，材料，第59巻，第8号, p. 658 (2010).
  3. 書評，田中啓介著，機械工学基礎コース　材料強度学，材料，第58巻，第5号, p. 416 (2009).
  4. 共著，多孔体の精密制御と機能・物性評価，サイエンス&テクノロジー(2008)，第2章　多孔体の構造と機能・物性評価　37.多孔質セラミックスの強度評価，pp. 292-301.
Home
更新： 2018-01-05